Selected/checked: When the Enable Private Network Mode check box is selected/checked, end-point access has to go through the switch IP and port forward.The Enable Private Network Mode check box to configure Ethernet VLAN settings with a System ID number.Ĭhoose a System ID number from the System On applicable DM Switches and DMPS Controllers, select Click the Renew DHCP button to obtain a new DHCP IP Address:.
#Device discovery tool crestron remote windows#
WINS: Select the Enabled or Disabled radio button to enable or to disable the Windows Internet Name Service (WINS) WINS maps host names to network addresses. The device's designated DHCP Server will dynamically assign the device an IP Address and populate the corresponding IP Address field. (If the Use DHCP IP Address radio button has been selected) If data will not be routed outside the LAN, the Default Router can Select the Use Static IP Address or Use DHCP IP Address radio button, as applicable.Įnter the IP Address, IP Subnet Mask and Default Router in theĬorresponding fields. Use Static IP Address/Use DHCP IP Address Name in the corresponding field, if the network requires this to resolve the Host Name properly. This will ensure that the correct Host Name appears in dialog box title bars this is an invaluable point of reference when modifying the device's Ethernet Settings.
Note: After clicking OK/Apply, it is recommended to close and reopen Toolbox in order to propagate the Host Name through Toolbox’s various dialog boxes and tools ( ie: Device Discovery Tool).
Valid characters are 0 – 9, A – Z (not case-sensitive),Īnd the dash (hyphen character). Depending on the device, the host name can be between 15 and 64 characters.
Upon the active device, there is a separate top-level tab for the Ethernet adapter and the Control Subnet, if applicable.Įnter the Host Name in the corresponding field. Tabs that are available and can be configured. Tab-based-the active device determines the specific Ethernet and network-related Settings as needed and optionally save them in the address book if desired. Or utilize built in reporting such as the setup pages on a touch screen to Or RS-232 connection if available, the Discovery Tool to find the device, You are connecting to the device for the first time, you may use a USB Function to configure the IP settings of an Ethernet device.
0 kommentar(er)
